China Magnetic Paraffin Preventer factory

China Magnetic Paraffin Preventer factoryChina Magnetic Paraffin Preventer factory

China Magnetic Paraffin Preventer factory CTH permanent magnet cylinder type tailings recovery machine In the past, due to the underdeveloped mineral processing equipment and technology, the tailings yield is very high. Now, with the lack of resources, people gradually focus on the recovery of tailings, so the tailings recovery magnetic separator is also developed. Nowadays, disc tailings recovery machine and magnetic separator are usually used. The disc type tailings recovery machine is composed of five parts, which are ore shortage device, main machine, chute, rack and ore collecting tank. They are located in different parts of the disc type tailings recovery magnetic separator, so their functions are different. When the magnetic separator is working, they interact to complete the tailings recovery work together. When working, the pulp flows from the inflow end to the body end. Because there is a gap between the disks, the magnetic substances in the pulp are adsorbed on the surface of the magnetic disk, and the non-magnetic minerals are discharged from the discharge end of the chute. The magnetic material adsorbed on the surface of the magnetic disk is driven by the rotation of the main disk to discharge from the slurry level. When the magnetic mineral adsorbed on the disk enters the unloading area, it is discharged into the ore collecting tank by the unloading device between the disk gaps for collection and finally discharged. The magnetic field is filled between the disks of the disc tailings recovery magnetic separator, so the materials between the disks can receive the effect of the magnetic field to realize the full recovery of materials, and the recovery rate is greatly improved. The distance between the magnetic disk and the magnetic pole is very small. The magnetic separator is specially designed for tailings recovery, and it has very good treatment effect for large flow and low-grade tailings. The discharge mode is non-contact forced discharge, which ensures the continuity of feeding. In order to protect the disk from wear, the surface is coated with a protective layer, so the service life of the magnetic separator is greatly extended. Although the disc type tailings recovery magnetic separator has a large processing capacity, it covers a small area and has a small level difference between feeding and discharging. It can be installed wherever there is a tailing chute. The important thing is that the tailings recovery magnetic separator creates huge economic benefits, which are embodied in water saving, power saving and output benefits. Water saving performance in the magnetic mineral water content, flow state, do not need additional water. Power saving performance in a single large capacity, installed capacity of only a few thousand watts. Because of its large capacity and high recovery rate, its annual output benefit is huge. 1. High recovery rate There is no blind area for the pulp to pass through the selected area when the equipment is used for mineral processing (the blind area for mineral processing is that there is no ore absorption outside the plate of the disc tailings recovery machine). The recovery rate is about 20% higher, and one-stage beneficiation is enough. 2. Long service life The equipment uses automatic ore unloading, only water spraying, without any mechanical scraping, so the service life is very long, which is 3-5 times of that of the disc reclaimer. 3. Low maintenance cost The equipment does not need mechanical scraping when unloading, and the maintenance cost is very low when using. It only needs to inject grease regularly and change the drive belt In order to increase the gap between the beneficiation machine and neodymium and boron concentrator, it is necessary to increase the gap between the beneficiation machine and neodymium and boron concentrator. This machine is the first in China. Compared with the original disc reclaimer used in iron ore regrinding plant, the grade of magnetic iron in the original disc type tailings is 1.2%, while the grade of magnetic iron in the tailings of our cylinder type tailings is 0.8%. 2. Model Examples of models are as follows: 3. Purpose CTH series magnetic separators are wet separators. It is suitable for tailings recovery in water concentration plant. CTH Magnets Used in Magnetic Separators And the main technical parameters modelSpecificationsroller speed(r/min) Average magnetic induction intensity of roller surface(mT)work clearance 銕?/phandle ability m3electric machinery power (Kw)External dimension Length 脳 width 脳 height(銕?equipment Total weight (銕? roller diameter(銕?roller length (銕? CTH-710750100010.0300鈮?018032120脳1220脳14201390 CTH-712750120010.0300鈮?023032320脳1220脳14201550 CTH-718750180010.0300鈮?038032920脳1220脳14201850 CTH-91890018008.0300鈮?0043032995脳1490脳14802900 CTH-92190021008.0300鈮?0051033295脳1490脳14803100 CTH-92490024008.0300鈮?0060033595脳1490脳14803560 CTH-1015105015007.0300鈮?0034042605脳1710脳17503500 CTH-1018105018007.0300鈮?0043042905脳1710脳17504050 CTH-1021105021007.0300鈮?0051043205脳1710脳17504450 CTH-1024105024007.0300鈮?0060043505脳1710脳17505050 CTH-1030105030007.0300鈮?0077043805脳1710脳17506250 CTH-1218120018006.5300鈮?205105.53250脳1710脳18005800 CTH-1224120024006.5300鈮?207205.53577脳1960脳18206200 CTH-1230120030006.5300鈮?209305.54177脳1960脳18207200 CTH-1240120040006.5300鈮?2012707.55177脳1960脳18207800 CTH-1530150030005.0300鈮?40108011.04500脳2430脳23708100 CTH-1540150040005.0300鈮?40149011.05500脳2430脳23709300China Magnetic Paraffin Preventer factory website:http://www.xgmagneticseparators.com/magnetic-paraffin-preventer/


Cjfdshsi36

10 Magazine posts

Comments